F 350 2WD Super Duty V8-5.4L (2008)
webbing are not incorrectly twisted.
2. Remove the rear seat backrest.
Crew Cab vehicle with bench seat
3. Using an appropriate tool, push in the pin hole while pulling the safety belt tongue out of the safety belt buckle.
-
After installation, when inserting the safety belt tongue into the safety belt buckle, make sure the safety belt buckle and safety belt retractor
webbing are not incorrectly twisted.
4. Fold the rear bench seat backrest forward.
Crew Cab vehicle with 60/40 seat
5. Using an appropriate tool, slide the release tab forward in the slot while pulling the safety belt tongue out of the safety belt buckle.
