F 350 2WD Super Duty V8-5.4L (2008)
18. Disconnect the solenoid body electrical connector.
All vehicles
19. Disconnect the rear transmission fluid cooler tubes from the transmission case and remove them from the vehicle.
Installation
All vehicles
1. Install the rear transmission fluid cooler tubes into the vehicle and connect the transmission fluid cooler tubes to the transmission case.
^
Tighten to 40 Nm (30 ft. lbs.). Late build vehicles
2. Connect the solenoid body electrical connector.
^
Tighten to 5 Nm (44 inch lbs.).
3. Install 4 new front stabilizer bar bracket nuts.
^
Tighten to 48 Nm (35 ft. lbs.).
