F 350 2WD Super Duty V8-5.4L SOHC VIN L (2002)
11. Remove the two headliner rear pin-type retainers.
12. Position the left and right rear door opening weatherstrips down from the headliner.
13. Remove the bench seat, both seats (60/40), middle and right seats (40/20/40), or right bucket seat, depending on the front seat configuration.
14. If equipped, remove the floor console.
15. Lift up on the cover and remove the front and rear seat nut and shoulder safety belt guides.
CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so may
cause the retractor to lock and not release the safety belt.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
16. Remove the front and rear door scuff plates.
