F 350 2WD Super Duty V8-5.4L SOHC VIN L (2002)
Valve Cover: Service and Repair
LH
Valve Cover LH
Removal
1. Disconnect the battery ground cable.
2. Remove the engine air cleaner (ACL) and the air cleaner outlet pipe.
3. Remove the crankcase ventilation tube from the valve cover.
4. If equipped, remove the exhaust manifold to EGR valve tube.
5. Disconnect the LH fuel injector electrical connections.
6. Disconnect the LH ignition coil electrical connections.
7. Disconnect the fuel pressure regulator vacuum hose and lift the fuel charging wiring off the valve cover studs.
8. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
