ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering System - General Information|Page 6605 > < Steering System - General Information|Page 6603
Page 6
background image

1. NOTE:  A whine heard from the power steering pump may be caused by air in the system. The power steering purge procedure must be performed

prior to any component repair for which power steering noise complaints are accompanied by evidence of aerated fluid.

Remove the reservoir cap. Check the fluid.

2. Tightly insert the stopper of the Vacuum Pump into the reservoir.
3. Start the vehicle.

4. Apply maximum vacuum and maintain it for a minimum of three minutes with the engine speed set at idle.
5. Release the vacuum and remove the vacuum pump.

Steering System - General Information|Page 6605 > < Steering System - General Information|Page 6603