F 350 2WD Super Duty V8-5.4L SOHC VIN L (2002)
8. Remove the solenoid body assembly.
1
Remove the bolts.
2
Remove the nut.
3
Remove the solenoid body assembly.
9. Remove the solenoid screen assembly by rotating and pulling.
10. CAUTION: The steel Electronic Pressure Control (EPC) check ball is spring-loaded under the valve body separator plate.
NOTE: If the valve body separator plates are not to be serviced, proceed to installation procedure.
Remove the valve body separator plate reinforcement.
1
Remove the bolts.
2
Remove the separator plate reinforcement.
11. Lower and remove the valve body separator plate and gaskets.
