F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
3. Pull the carpet or mat back to see the front body insulator plug button.
4. Remove the button.
5. Remove and discard the bolt.
-
To install, tighten to 80 Nm (60 lb-ft).
6. Remove the insulator.
7. NOTE:
-
Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
-
No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.
