F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
3
Remove the 2 B-pillar assist handles.
11. CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so
may cause the retractor to lock and not release the safety belt.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
Remove the LH and RH shoulder safety belt guides.
1
Position the shoulder safety belt guide cover up.
2
Remove the shoulder safety belt guide nut.
-
To install, tighten to 40 Nm (30 lb-ft).
3
Remove the shoulder safety belt guide.
12. Position the B-pillar trim panels aside.
All vehicles
