F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
-
To install, tighten to 40 Nm (30 lb-ft).
3
Remove the shoulder safety belt guide.
5. Remove the safety belt anchor.
1
Use the Seat Belt Bolt Bit to remove the bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
2
Remove the safety belt anchor.
6. Remove the B-pillar trim panel.
7. Route the safety belt and the shoulder safety belt guide through the B-pillar trim panel openings.
8. To install, reverse the removal procedure.
C-Pillar Trim Panel - Crew Cab
C-PILLAR TRIM PANEL - CREW CAB
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal and Installation