F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
6. Connect the heated seat switch electrical connector.
All seats
7. Position the side trim cover. Install the 3 trim cover screws.
-
The seat backrest pivot bolt shaft must be inserted into the cover standoff.
8. Push the rearward lower corner of the side shield to engage the metal retaining clip.
9. Position the lumbar adjuster control and install the 2 mounting screws. Install the adjuster knob.
10. Position the seat back recliner lever cover and install the screw.
11. Install the front seat.
Rear Seat Cushion - SuperCab
REAR SEAT CUSHION - SUPERCAB
Removal and Installation
1. NOTE: 60 percent seat shown, 40 percent seat similar.
Remove the seat.
