F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
2. Remove the safety belt buckles from the cushion trim retainer (1 side shown).
3. Remove the 2 LH seat riser nuts and remove the seat riser.
-
To install, tighten to 50 Nm (37 lb-ft).
4. Remove the 2 RH seat riser nuts and remove the seat riser.
-
To install, tighten to 50 Nm (37 lb-ft).
5. Remove 2 seat track-to-cushion front bolts (1 shown).
-
To install, tighten to 25 Nm (19 lb-ft).
6. Remove 2 seat track-to-cushion rear bolts (1 shown) and remove the seat track assembly.
-
To install, tighten to 25 Nm (19 lb-ft).
