F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
5. Remove the 2 LH backrest recliner bolts.
-
To install, tighten to 50 Nm (37 lb-ft).
6. NOTE: During installation, make sure the recliner latches are seated in the adjusting rod before installing the recliner latch bolts.
Remove the LH recliner latch and adjusting rod.
1
Remove the LH recliner latch from the adjusting rod.
2
Remove the recliner adjusting rod from the RH recliner latch and slide the adjusting rod out of the seat frame tubes.
7. Remove the 2 RH backrest recliner bolts and remove the recliner latch.
-
To install, tighten to 50 Nm (37 lb-ft).
8. To install, reverse the removal procedure.