F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
4. Remove the metal shavings.
5. For vehicles with a 2-piece brake disc and hub assembly:
1
Remove the brake disc from the hub.
2
Remove metal shavings from the hub, the brake disc mounting surfaces and from the ABS sensors.
3
Apply anti-seize lubricant to the hub mounting surface to prevent corrosion.
4
Align the match marks and install the brake disc on the hub.
6. NOTE: It is not required to install new brake pads if friction material properties are within guidelines.
Install the brake caliper and brake caliper anchor bracket.
