F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
2. Separate the parking brake cables at the parking brake equalizer.
3. Remove the 2 wire form bracket bolts from the frame rail and position the cable and conduit aside.
^
To install, tighten to 40 Nm (30 ft. lbs.).
4. NOTE: The parking brake cable and conduit must be routed to the outside of the leaf spring assembly.
Remove the parking brake cable bracket bolt from the LH spring bracket.
^
To install, tighten to 28 Nm (21 ft. lbs.).
5. Release the parking brake cable from the LH parking brake bracket assembly.
6. Rotate the parking brake cable 90 degrees to release it from the parking brake actuating lever and remove the cable.
7. To install, reverse the removal procedure.
