F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
10. Position the starter wiring harness support bracket and install the nut.
^
Tighten to 10 Nm (89 inch lbs.).
11. If equipped, install the transmission cooler tube support bracket and the nut.
^
Tighten to 10 Nm (89 inch lbs.).
12. Position the oil cooler and install the threaded shaft.
^
Tighten to 58 Nm (43 ft. lbs.).
13. Install a new oil filter.
^
Tighten to 16 Nm (12 ft. lbs.).