F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any
of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal
injury or a fire hazard.
1. Disconnect the fuel supply spring lock coupling from the fuel rail. For additional information, refer to Fuel Delivery and Air Induction.
2. Drain the cooling system. For additional information, refer to Cooling System.
3. Remove the generator. For additional information, refer to Alternator.
4. Remove the air cleaner. For additional information, refer to Fuel Delivery and Air Induction.
5. Disconnect the upper radiator hose from the thermostat housing.
6. Disconnect the heater coolant hose from the coolant bypass tube.
7. Disconnect the evaporative emissions system (EVAP) tube from the intake manifold. For additional information, refer to Fuel Delivery and Air
Induction.
8. Disconnect the quick connect couplings and remove the positive crankcase ventilation (PCV) tube. For additional information, refer to Fuel
Delivery and Air Induction.
9. Disconnect the fuel rail pressure and temperature sensor electrical connector and vacuum connector.
10. Disconnect the 8 fuel injector electrical connectors.
11. Disconnect the 4 LH ignition coil electrical connectors.
12. Disconnect the throttle position (TP) sensor and electronic acceleration control electrical connectors.
13. Disconnect the heated PCV intake fitting electrical connector.
