F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
14. NOTE: LH shown, RH similar.
Disconnect the 2 radio ignition interference capacitor electrical connectors.
15. Remove the 2 nuts and the RH and LH radio ignition interference capacitors.
16. Disconnect the RH camshaft position (CMP) sensor electrical connector.
17. Remove the bolt and the RH CMP sensor.
^
Discard the O-ring seal.
18. Disconnect the LH CMP sensor electrical connector.
19. Remove the bolt and the LH CMP sensor.
^
Discard the O-ring seal.
20. Remove the 4 bolts and the coolant pump pulley.
21. Remove the 2 nuts and the air cleaner outlet tube support bracket.