F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
3. CAUTION: To prevent damage to the fitting and the tube, use a backup wrench when loosening or tightening the fitting nut.
Disconnect the evaporator core outlet tube.
-
To install, tighten to 49 Nm (36 lb-ft).
-
Discard the O-ring seal.
4. Disconnect the auxiliary fitting.
-
To install, tighten to 8 Nm (71 lb-in).
-
Discard the O-ring seal.
5. Disconnect the manifold and tube assembly.
-
To install, tighten to 8 Nm (71 lb-in).
-
Discard the O-ring seal.
6. Detach the evaporator inlet from the clip.