F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator
TEMPERATURE BLEND DOOR ACTUATOR
Removal and Installation
1. Release the stops and lower the glove compartment door.
2. Disconnect the connector.
3. Remove the electronic blend door actuator and bracket assembly.
1
Remove the 2 screws.
2
Rotate the blend door actuator and bracket assembly.
3
Remove the electronic blend door actuator and bracket assembly.
4. To install, reverse the removal procedure.