F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
18. Connect the glow plug controller and attach the wire harness.
19. Position the vacuum pump and install the bolts. Tighten to 11 Nm (8 lb-ft).
-
Connect the vacuum connectors.
20. Connect the vacuum pump electrical connector.
All vehicles
21. Connect the heater control valve vacuum connector (if equipped).
22. Connect the vacuum reservoir vacuum connectors.
23. Install the RH fender splash shield.
24. Install the RH battery.
25. Install the suction accumulator.
