F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
4. Rotate the primary locking tab to the fully opened position and squeeze the secondary locking tabs to release the locking mechanism.
5. Push the locking mechanism outward and release the fuel supply tube.
Connect - Type III (ITT Posilock)
1. NOTE: Apply clean engine oil to O-ring seals.
Install the tube into the quick connect coupling until it is fully seated.
2. CAUTION: Make sure the retainer clip clicks into place when installing.
Depress the retainer clip until it is flush with the quick connect coupler housing and it is fully seated on the tube.
3. CAUTION: To make sure that the fuel tube is fully seated, pull on the tube.
