F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
2. Disconnect the battery ground cable.
3. Disconnect the heated oxygen sensor (HO2S) electrical connector.
4. Using the special tool, remove the HO2S.
-
Apply penetrating lubricant to the HO2S to assist in removal.
Installation
1. Using the special tool, install the HO2S.
-
To install, tighten to 46 Nm (34 lb-ft).
-
Apply a light coat of high temperature nickel anti-seize lubricant to the HO2S threads prior to installation.
2. Connect the HO2S electrical connector.
3. Connect the battery ground cable.