F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
^
Discard the Teflon(R) seal.
^
To install, tighten to 35 Nm (26 ft. lbs.).
3. With the vehicle in NEUTRAL, position it on a hoist.
4. Release the return hose-to-fluid cooler clamp and remove the return hose.
5. To install, reverse the removal procedure.
^
Using the special tool, install a new Teflon(R) seal on the return line fitting.
^
Fill the power steering system.