F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
Pressure Regulating Solenoid: Service and Repair
Line Pressure Control Solenoid PC-A
Line Pressure Control Solenoid PC-A
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the transmission main control valve body.
3. Remove the solenoid body electrical connector O-ring seal.
4. Partially remove the solenoid body electrical wire harness.
1
Remove the wire harness to solenoid body bolts.
2
Disconnect the electrical connector from the pressure control solenoid (PC-A) and the shift solenoid (SSPC_C).
3
Lift the tab on the bulkhead connector, twist and push the bulkhead connector through the solenoid body.