F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
Wiper Motor Linkage: Service and Repair
Wiper Mounting Arm and Pivot Shaft
WIPER MOUNTING ARM AND PIVOT SHAFT
Removal and Installation
1. Remove the cowl top vent panels.
2. Remove the wiper mounting arm and pivot shaft.
1
Remove the 5 bolts.
-
To install, tighten to 8 Nm (71 lb-in).
2
Disconnect electrical connector.
3
Remove the wiper mounting arm and pivot shaft assembly.
3. If necessary, remove the wiper motor.
4. To install, reverse the removal procedure.