ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Master Cylinder|Removal and Installation|Page 8614 > < Brake Master Cylinder|Removal and Installation|Page 8612
Page 1
background image

Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir

Brake Fluid Reservoir 

Material

Material 

Removal 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
 

1. Disconnect the brake master cylinder fluid level switch.
2. Use a suitable suction device to drain the brake master cylinder reservoir.

3. Carefully pry up on the brake master cylinder reservoir to remove.

Installation 

Brake Master Cylinder|Removal and Installation|Page 8614 > < Brake Master Cylinder|Removal and Installation|Page 8612