F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
8. NOTE: If only one auxiliary heater line is to be removed, disconnect only the desired line.
Disconnect the auxiliary heater line quick coupling(s).
9. Remove and discard the auxiliary heater inlet line(s).
INSTALLATION
1. Install and connect the rear portion of the auxiliary heater inlet line(s).
-
Lubricate the coolant hoses with plain water only if needed.
2. Snap the rear auxiliary heater inlet line into the line brackets.
3. Install and connect the front auxiliary heater inlet line(s) through the fender well.
