F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
34. Remove the fan shroud mounting stud.
35. Install one lifting eye on the LH cylinder head.
36. CAUTION: Do not use the special tool to raise the engine. Damage to the special tool or vehicle may occur.
NOTE: The ball studs may have to be removed.
NOTE: This procedure requires a second bolt hook assembly. The tools are available through Rotunda tools with the following numbers: bolt
hook 303-FO70-6, handle 303-FO70-8, bracket 303-FO70-7 and washer 303-FO70-12004.
Install the special tool.
37. NOTE: The engine must be raised evenly.
Using a lifting crane, raise the engine until the turbo charger is about to touch the cowl. Secure the engine with the special tool.