ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cylinder Head Gasket > < Crankshaft Main Bearing Seal|Service and Repair|Page 2984
Page 6
background image

8. Install the flexplate or flywheel and 10 new bolts and Snug all bolts to 5 Nm (44 lb-in). Tighten all bolts to 94 Nm (69 lb-ft) in the sequence

shown.

9. Install the transmission. See: Transmission and Drivetrain

Cylinder Head Gasket > < Crankshaft Main Bearing Seal|Service and Repair|Page 2984