F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
6. CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
Remove the five line brackets by inserting a screwdriver in the stud hole and twisting.
7. NOTE: If only one auxiliary evaporator line is to be removed, disconnect only the desired line.
Disconnect the auxiliary evaporator line fitting(s).
-
Discard the O-ring seals.
8. Remove and discard the auxiliary evaporator line(s).
INSTALLATION
1. NOTE: Lubricate the O-ring seals with mineral oil.
Connect the rear auxiliary evaporator inlet line fitting(s).
2. Snap the rear auxiliary evaporator line(s) into the line brackets.
