F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Information Bus: Testing and Inspection
Communications Network
Initial Inspection
INSPECTION AND VERIFICATION
1. Verify the customer concern.
2. Visually inspect for obvious signs of electrical damage:
VISUAL INSPECTION CHART
Electrical
-
Central junction box (CJB) fuse 12 (20A)
-
Wiring harness
-
Connectors
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the cause is not visually evident, connect the diagnostic tool to the data link connector and select the vehicle to be tested from the diagnostic tool
menu. If the diagnostic tool does not communicate with the vehicle:
-
check that the program card is correctly installed.
-
check the connections to the vehicle.
-
check the ignition switch position.
If the diagnostic tool still does not communicate with the vehicle, GO to Pinpoint Test S. See: Pinpoint Tests/Pinpoint Tests/Test S
5. GO to Pinpoint Test PC. See: Pinpoint Tests/Pinpoint Test PC (Precheck)
Pinpoint Test PC (Precheck)
PINPOINT TEST PC: DATA LINK DIAGNOSTICS TEST
Test PC1
Test A
PINPOINT TEST A: THE ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DOES NOT RESPOND TO THE DIAGNOSTIC TOOL
