F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Glow Plug: Service and Repair
Glow Plug Sleeve
GLOW PLUG SLEEVE
Special Tool(s)
SPECIAL TOOL(S)
REMOVAL
1. NOTE: To install new glow plug sleeves, the cylinder heads must be removed from the vehicle.
Remove the cylinder heads from the engine.
2. Remove the lifting bracket from the cylinder head.
3. Remove the bolts and separate the rocker arm carrier from the cylinder head.
4. Remove the press-in-place gasket.
-
Remove the cylinder head dowels.
-
Clean and inspect the gasket.