F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
3. Install the glow plug sleeve into the glow plug bore until it bottoms.
4. Clean the glow plug sleeve after installation with a nylon brush and solvent. Make sure Threadlock 262(R) sealant is cleaned out before it hardens.
5. Install the press-in-place gasket.
-
Install new dowels in the cylinder head an the gasket.
6. Position the rocker arm carrier on the cylinder head. Install the bolts.
7. Install the lifting bracket on the cylinder head.
8. Install the cylinder heads.
