ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Technician Safety Information|Page 10416 > < Technician Safety Information|Page 10414
Page 9
background image

19. Install the driver air bag module.

1

Connect the horn electrical connector.

2

Connect the driver air bag module electrical connector.

3

Position the driver air bag module into the steering wheel.

4

Install the two bolts.

5

Install the two steering wheel back cover plugs.

20. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the

supplemental restraint system (SRS) deactivation/reactivation procedure.

Reactivate the supplemental restraint system (SRS).

21. WARNING:  The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure

to remove could result in injury and possible violation of vehicle safety standards. 

With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure

Technician Safety Information|Page 10416 > < Technician Safety Information|Page 10414