F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Center Link: Service and Repair
Sector Shaft Arm Drag Link-F-250, F-350, 4x2
Special Tool(s)
Special Tool(s)
Removal
NOTE: Replace the steering sector shaft arm drag link (3304) if the ball stud is loose in the socket or the steering sector shaft arm drag link is bent.
Replace the front suspension steering ball stud dust seal if any nicks, cuts or tears are present. Do not attempt to straighten a steering sector shaft arm
drag link.
1. Position and lock the wheels in the straight-forward position. Raise and support the vehicle.
2. Loosen the adjusting sleeve clamps.
3. Remove the cotter pin and castellated nut. Discard the cotter pin.
