F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Axle Beam: Service and Repair
Axle - F-250, F-350, Excursion
Special Tools and Equipment
Special Tool(s)
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure proper retention of these parts.
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the front disc brake caliper, front disc brake hub and rotor and front disc brake rotor shield.
4. If equipped, remove the front disc brake ABS sensor retainer bolt and the ABS sensor harness bracket bolt from the front wheel spindle. Position
the ABS sensor out of the way.
5. Remove the cotter pin and the castellated nut from the tie rod end. Discard the cotter pin.
