ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Stabilizer Link|Front|Page 9627 > < Stabilizer Link|Front
Page 1
background image

Stabilizer Link: Service and Repair
Rear

Stabilizer Bar and Link - Ford Axle

Stabilizer Bar and Link - Super Duty F-250, F-350, Excursion, Ford Axle 

Removal 

CAUTION:  Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. Install new parts with the same part number or an equivalent part if installation is necessary. Do not use an installation part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.

NOTE:  Super Duty F-250, F-350 Wide Frame shown, Super Duty F-350 Narrow Frame similar.

1. Raise and support the vehicle. 

2. Remove the nuts from both lower ends of the stabilizer bar links and remove the washers.

3. Remove the nuts and washers from both upper ends of the stabilizer bar links-to-frame and remove the links.

4. Remove the nuts from both stabilizer bar retainer-to-axle brackets and remove the stabilizer bar retainers, stabilizer bar mounting brackets, U-bolts

and the stabilizer bar.

Installation 

Stabilizer Link|Front|Page 9627 > < Stabilizer Link|Front