F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
5.
Remove the No. 14 front reverse planet thrust washer. See Figure 37.
6.
Install the No. 13 and the No. 14 reverse planet thrust washers onto the new reverse planet assembly, using petroleum jelly to hold them in place.
Forward Geartrain Assembly Service
NOTE:
This Forward Geartrain Assembly Service procedure has been developed to coincide specifically with replacing the reverse planet assembly when
there is no damage to the output hub.
If a complete overhaul is required, refer instead to Section 307-01B of the 2004 F-SD/Excursion Workshop Manual or 307-01C of the 2004 E-Series
Workshop Manual for repair instructions.
1.
Remove the center support bearing assembly and the No. 6 thrust bearing from the forward clutch/direct clutch assembly.
2.
Remove the Special Tools Coast Clutch Fixture Handle 307-384 and Coast Clutch Fixture Body 307-385. See Figure 38.
