ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

4R100 Automatic Transmission|Page 7412 > < 4R100 Automatic Transmission|Page 7410
Page 1
background image

Transmission Mount: Service and Repair
Torqshift - Automatic Transmission

Transmission Insulator and Retainer 

Removal 

1. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer Maintenance/Service and Repair.

2. Remove the rear transmission support insulator.

1

Remove the rear transmission support insulator nuts.

2

Remove the rear transmission support insulator bolts.

3. Using a suitable high-lift transmission Jack, remove the rear transmission support insulator.

1

Raise the transmission upward, off the transmission support insulator.

2

Remove the rear transmission support insulator.

Installation 

1. Install the rear transmission support insulator.

1

Install the rear transmission support insulator.

2

Lower the transmission onto the transmission support insulator.

4R100 Automatic Transmission|Page 7412 > < 4R100 Automatic Transmission|Page 7410