F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Front Door Latch
Removal and Installation
1. NOTE: The window must be in the raised position.
Remove the exterior front door handle. For additional information, refer to Exterior Front Door Handle See: Front Door Handle/Front Door
Exterior Handle/Service and Repair/Exterior Front Door Handle.
2. Disconnect the push button rod from the front door latch.
3. Release the front door latch actuating cable locators.
4. Remove the 3 screws and position the front door latch aside.
-
To install, tighten to 12 Nm (106 lb-in).
5. Disconnect the front door latch electrical connector(s).
6. Remove the front door latch cable water seal.
7. Remove the front door latch.
-
Release the cable conduit.
-
Release the cable.
8. To install, reverse the removal procedure.