ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 8172 > < Procedures
Page 1
background image

Rear Door Latch: Removal and Replacement

Door Latch - Rear, Crew Cab

Door Latch - Rear, Crew Cab

Removal and Installation

1. NOTE: The window must be in the raised position.

Remove the exterior door handle. For additional information, refer to Exterior Rear Door Handle - Crew Cab  See: Rear Door Handle/Rear Door
Exterior Handle/Service and Repair/Exterior Rear Door Handle - Crew Cab.

2. Release the lock linkage guide clip from the rear door.

3. Release the clip and disconnect the door lock actuating rod from the latch.

4. Release the clip.

5. Remove the 3 screws and position the rear door latch aside.

-

To install, tighten to 12 Nm (106 lb-in).

6. Remove the rear door latch actuating cable water seal.

7. Disconnect the actuating cable and conduit.

8. Disconnect the 2 electrical connectors and remove the rear door latch.

9. To install, reverse the removal procedure.

Rear Door Handles, Locks and Latches - Exploded View, Crew Cab

Rear Door Handles, Locks and Latches - Exploded View, Crew Cab

NOTE: LH door shown, RH door similar.

Procedures|Page 8172 > < Procedures