F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Hood Latch Release Cable: Service and Repair
Hood Latch Cable - Secondary
Hood Latch Cable - Secondary
1. Remove the 2 secondary hood latch release handle bolts.
-
To install, tighten to 12 Nm (106 lb-in).
2. Disconnect the secondary hood latch release cable.
1. Disconnect the secondary hood latch release cable from the hood latch.
2. Disconnect the secondary hood latch release cable guides.
3. Remove the secondary hood latch release cable and handle.
4. To install, reverse the removal procedure.
