F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Grille: Service and Repair
Radiator Grille Support
Radiator Grille Support
Removal and Installation
1. Raise the hood.
2. Release the hood latch cable clips from the radiator support.
3. Remove the hood latch bolts and position the hood latch cable and hood latch aside.
-
To install, tighten to 35 Nm (26 lb-ft).
4. Remove the upper engine air cooler bolts.
-
To install, tighten to 22 Nm (16 lb-ft).
5. Remove the bolts from the power steering cooler.
-
To install, tighten to 35 Nm (26 lb-ft).
6. Disconnect the horn electrical connector.