F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Sunroof / Moonroof Panel: Service and Repair
Roof Opening Panel Glass
Roof Opening Panel Glass
Removal and Installation
NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the
roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new
roof opening panel frame has been installed. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.
1. NOTE: The roof opening panel glass must be in the CLOSED position.
Remove the 4 roof opening panel glass screws.
2. Remove the roof opening panel glass.
3. To install, reverse the removal procedure.
-
Align the roof opening panel. For additional information, refer to Roof Opening Panel Alignment See: Adjustments.
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.