F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Disassembly and Assembly
1. Remove the rear seat. For additional information, refer to Seat - Rear, Crew Cab, Bucket Seat See: Service and Repair/Rear Seats/Seat - Rear,
Crew Cab, Bucket Seat.
2. Remove the rear seat backrest. For additional information, refer to Seat Backrest - Rear, Crew Cab, Bucket Seat See: Removal and
Replacement/Rear Seats/Seat Backrest - Rear, Crew Cab, Bucket Seat.
3. Release the clip and pull to remove the latch handle.
4. Release the backrest trim cover lower J-clip.
5. NOTICE: Use care when separating the backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from
the backrest foam pad.
Separate the hook-and-loop strips and invert the backrest trim cover to the row of hog rings.
6. Remove the row of hog rings.
7. Separate the hook-and-loop strips, invert and remove the backrest trim cover.
8. Remove the backrest foam pad from the backrest frame.
9. Remove the anti-squeak bag from the backrest frame.
10. Remove the 2 recliner-to-backrest frame bolts and recliner.
-
To install, tighten to 50 Nm (37 lb-ft).
11. Release the 4 clips from the backrest frame and remove the manual lumbar assembly.
12. To assemble, reverse the disassembly procedure.
Seat Backrest - Rear, SuperCab
Seat Backrest - Rear, SuperCab
