F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
-------------------------------------------------
H6 CHECK FOR CORRECT TBC MODULE OPERATION
-
Check the TBC module connector for:
-
corrosion.
-
pushed-out pins.
-
spread terminals.
-
Connect the TBC module connector and make sure that it is seated correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new TBC module. REFER to Trailer Brake Control (TBC) Module See: Service and Repair. CLEAR the DTCs. REPEAT the self-test.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. REPEAT the
self-test.
-------------------------------------------------