F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Coolant Reservoir: Service and Repair
Coolant Expansion Tank
Coolant Expansion Tank
Removal and Installation
1. Drain the fuel and turbocharger cooling system. For additional information, refer to Fuel and Turbocharger Cooling System Draining, Filling and
Bleeding See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair.
2. Disconnect the fuel cooler-to-coolant expansion tank hose from the coolant expansion tank.
3. Disconnect the coolant expansion tank-to-turbocharger actuator cooler hose from the coolant expansion tank.
4. Remove the 3 bolts and the coolant expansion tank.
-
To install, tighten to 9 Nm (80 lb-in).
5. To install, reverse the removal procedure.
-
Fill and bleed the fuel and turbocharger cooling system. For additional information, refer to Fuel and Turbocharger Cooling System Draining,
Filling and Bleeding See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair.