F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
4. Connect the wiring to the heater return tube.
5. Position the lower vertical EGR cooler bracket and loosely install the bolt.
6. Install a new vertical EGR cooler lower clamp. Tighten the clamp nut in 3 stages.
-
Stage 1: Tighten the nut to 10 Nm (89 lb-in).
-
Stage 2: Loosen the nut 720 degrees (2 complete turns).
-
Stage 3: Tighten the nut to 8 Nm (71 lb-in).
7. Tighten the lower EGR cooler bracket bolt.
-
Tighten to 62 Nm (46 lb-ft).
8. Connect the upper radiator hose to the thermostat housing. Install the spring clip.
-
Verify the spring clip is correctly seated.
9. Install the degas bottle. For additional information, refer to Degas Bottle - 6.4L Diesel See: Coolant Reservoir/Service and Repair/Degas Bottle.
10. Install the upper cooling fan shroud. For additional information, refer to Cooling Fan Shroud - 6.4L Diesel, Upper See: Fan Shroud/Service and
Repair/Cooling Fan Shroud - Upper.
