F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
4. Remove the secondary generator.
All vehicles
5. Disconnect the windshield washer hose.
6. Disconnect the underhood light electrical connector and pin-type retainers. Position the wiring aside.
7. NOTE: Mark the location of the hinges prior to removing the hood.
With the help of an assistant, disconnect the hood lift rods. Remove the 4 bolts and the hood.
8. Disconnect the parking brake cable at the cable-to-cable union.
9. Remove the parking brake cable from the frame bracket.
10. Remove the 2 exhaust downpipe bolts.
11. Remove and discard the 4 RH engine mount retaining nuts.