F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
23. Remove the 2 retaining nuts. Position the bracket and master cylinder aside.
24. Remove and discard the bolt. Disconnect the steering shaft.
25. Position the fender covers between the cab and the body.
26. Chock the tires.
27. WARNING: Securely strap the cab to the lift using an appropriate tool. If the cab is not correctly secured, it could shift or fall. Failure to
follow this instruction may result in serious personal injury.
Position the hoist to the body. Using the Universal Cab Hold-Down Straps, secure the body to the hoist.
28. Install the Engine Lifting Bracket on the Front End Accessory Drive (FEAD) bracket.
29. NOTICE: Use a Heavy Duty Lifting Crane and load leveler rated at a minimum of 907 kg (2,000 lb) or damage to the vehicle may occur.
Position the Heavy Duty Lifting Crane with a commercially available load leveler and attach the chains to the front of the engine.
30. Loosen the center bolt for the RH engine mount.
31. Remove and discard the 2 studs for the RH engine mount.
